WACKER NEUSON DUMPERS™
Electrical wheel and track dumpers
Start easily and off you go: thanks to the electric travel drive system, no frequent gear changing is required and the operator can focus entirely on his work. The drive system and the work hydraulics can be operated self-contained of each other.
Just as powerful as a conventional wheel dumper, but extremely quiet – ideal in noisesensitive environments.
Just as powerful as a conventional wheel dumper, but extremely quiet – ideal in noisesensitive environments.
Electric drive system
Simply start and off you go: Because of the hydrostatic drive system, no frequent gear changing is needed and the operator can focus on the task. The drive system and the working hydraulics can be operated independently of each other.
The fully electric dumper operates without emissions and a a low noise level. At almost half the volume (by 6 dB LwA), additional areas of application are made possible. The dumper is also operated completely electrically, without emissions and completely noiseless.
Chargeable at a normal 220 V socket
With only 8 hours maximum charge time, the machine can easily be charged overnight on an outlet and is ready to use in the morning again with a full battery. The permanently mounted charging cable for a 220 V outlet is stowed securely on the machine, meaning the machine is not bound to any fixed location during the charging process and can be spontaneously charged anywhere. To increase running time, the machine can also be charged at any time, for example on work breaks.
The fully electric dumper operates without emissions and a a low noise level. At almost half the volume (by 6 dB LwA), additional areas of application are made possible. The dumper is also operated completely electrically, without emissions and completely noiseless.
Chargeable at a normal 220 V socket
With only 8 hours maximum charge time, the machine can easily be charged overnight on an outlet and is ready to use in the morning again with a full battery. The permanently mounted charging cable for a 220 V outlet is stowed securely on the machine, meaning the machine is not bound to any fixed location during the charging process and can be spontaneously charged anywhere. To increase running time, the machine can also be charged at any time, for example on work breaks.
Transport material completely free of emissions
• Noise pollution for the operator is under 60 decibels. This is equivalent to normal room volume.*
• Thanks to the electric motor, the CO2 emissions are reduced by 90% over the entire life cycle.**
• The maintenance-free 48 V battery has enough power for a full workday – depending on the type of application.
• The battery charger is integrated in the battery and is easy to connect to a 230 V socket.
• There is an electric motor each for the drive system and the hydraulics, incl. energy recovery when braking and going downhill.
*Emission sound pressure level (LpA): This specifies the sound level of a device at the working area directly assigned to it, for example in the operator’s cab.
**CO2 emissions over the entire service life, direct and indirect, thus including battery production and energy generation (EU mix), compared with a conventional product of the same class.
• Thanks to the electric motor, the CO2 emissions are reduced by 90% over the entire life cycle.**
• The maintenance-free 48 V battery has enough power for a full workday – depending on the type of application.
• The battery charger is integrated in the battery and is easy to connect to a 230 V socket.
• There is an electric motor each for the drive system and the hydraulics, incl. energy recovery when braking and going downhill.
*Emission sound pressure level (LpA): This specifies the sound level of a device at the working area directly assigned to it, for example in the operator’s cab.
**CO2 emissions over the entire service life, direct and indirect, thus including battery production and energy generation (EU mix), compared with a conventional product of the same class.
INDUSTRIES
SC Titan Machinery Romania SRL
